Technical Data and prices:

Milling Machine HIGH-Z S-400:

• Drive : 4 Stepping Motors of MAE or EC-Motion with 1600 Steps/ rotation    (1/8 step)
• Guide ways X and Y axle 20 mm grinded and with hardened surface
• Ball bearings at both sides of trapezium spindles Tr. 12x3 mm flank lead
• Traverse speed of rapid feed max. 1500 mm/min
• Technical dissolution 0,000187 mm (1/8 Step)
• Clamping Area 600 x 400 mm
• Traverse paths: X= 400 mm; Y= 300 mm; Z= 110 mm
• Total dimensions with motors: LxBxH= approx. 650x500x500 mm
• Milling Motor anchorage: Euroneck Ø43 mm
• incl. Software PC-NC
• Reference- and Limit Switch on all axles
• Frame rack, therefore applicable for all purposes
• Weight: approx. 31 kg                                                 
• Complete machine Includet 4 driver microstep controller 4x 2,1 Ampere      2237 Euro, (German) VAT incl.

Milling Machine HIGH-Z S-720:

• Drive: 4 Stepping Motors of MAE or EC-Motion with 1600 Steps/ rotation (1/8 Step)
• Guide ways X and Y axle 20 mm grinded and with hardened surface
• Ball bearings at both sides of trapezium spindles Tr.12x3 mm flank lead
• Traverse Speed of rapid feed max. 1250 mm/min
• Technical dissolution 0,000187 mm (1/8 Step)
• Clamping Area 1050 x 500 mm
• Traverse paths: X= 720 mm; Y= 420 mm; Z= 110 mm
• Total dimensions with motors: LxBxH= approx. 1100x660x500 mm
• Milling Motor anchorage: Euroneck Ø43 mm
• incl. Software PC-NC
• Reference- and Limit Switch on all axles
• Applicable for all purposes due to frame rack
• Weight: approx. 41 kg                                                
• Complete machine Includet 4 driver microstep controller 4x 2,1 Ampere      2793 Euro, (German) VAT incl.

Milling Machine HIGH-Z S-1000:

same as HIGH-Z S720 and S400, however:

• Traverse paths: X= 1000 mm; Y= 600 mm; Z= 110 mm
• Traverse Speed of rapid feed max. 1000 mm/min       
• Complete machine Includet 4 driver microstep controller 4x 2,1 Ampere      3343 Euro, (German) VAT incl.

CNC-Router / Engraving machine High-Z / Data

Information about the Controler 4x 2,1 Ampere for S-400, S-720 and S-1000:

Suitable 1/8 Microstep 4-channel control:

• 4-channel control
• electricity up to 2,1 A per phase
• 4 connection for motors, 1 connection for 4 end or emergency stop button
• Connection to PC-parallel port
• Micro Step control, 1/8 Step
• „Sleep-Function“ for lowering electricity to standby
• Protection against high over voltage peaks
• Power supply unit
• ALU cooling units / 2 ventilators: one 80 and one 50.
• Connecting possibilities of 5 limit- or reference switches altogether or       emergency stop buttons
• All connections for motors and limit switches 9 Pol sub D.

A 5th channel controler to work with a 4th axle it cost 149 Euro more.

o

Motorcontroller Microstep 1600 Steps per resolution

The machines can be produced and delivered within approx. 3-4 weeks, as they go into production after effected payment or instalment only.

We ship worldwide. For shipping prices please request through email. Thank you

All prices are includet german VAT. If you are situated outside the EU, you pay without 16% german FAT. If you are situated inside the EU and have an TAX Number from your business you dont have to pay for german VAT too. 

www.cnc-step.com

We provide for movement

CNC STEP, Milling Cutter, Portal Milling Cutter, Milling Machines, Portal Milling Machines, 4-channel, Controller, Stepper, Stepping Motor, 3-axle, 4-axle, step-four software available too, step four control system, milling, engraving, brass, aluminium, brass, engraving plastic, engraving materials, engravings, cups, signs, door plate, 3D milling, Milling Machines, PCNC, WIN PCNC, Software, Stepping Motor Control, Motor Control, Linear Guidance, Linear Guide Ways, ball screws,  ball bearings, advertising technology, advertising, plexiglass, carbon, milling cutter, double cutter, VHM, tungsten carbide, full tungsten carbide, burin, engraving, deep automatic controller, dead stop, milling dead stop, quality, robust, cheap, reasonably priced, valuable price, CNC, Controls, Control, 2D, digitizer, digitize, scanning, positioning, fit with components, SMD, blanks, drilling, HPGL, PLT, Corel draw, CAD, CAM, automate, automation, t-groove plates, t-nuts, spindle, mill, milling, engraver, engrave, router, Kress, bushes, ball bearing, bearings, wood, plastic, ABS, plexiglass, advertising technology, letters, illuminated advertising, plywood, milling, wood, acryl, acrylics, plastic, knifeholder, router, electronic torch, plasma, plasma cutter, cutter, cut, engrave