Foam router bit Amana Tool®

Foam router bits from Amana Tool®

---

These foam router bits ensure you can mill your foam projects with incomparable attention to detail, accuracy and clarity. Achieve both precision and depth in foam carving and routing applications.

The ideal length for thicker materials

An overall length of 64mm, enables deeper cuts and larger take-off with fewer passes in thicker materials, resulting in much-improved productivity and fewer tool changes. That means you can work more economically with your CNC router and service customer orders promptly.

Foam router bits with Up-Cut

The Up-Cut of the foam router bits ensures that the chips are lifted and ejected by the right-hand spiral while the bottom of the groove remains free and clean. Ideal for 2D and 3D CNC milling applications in thicker material due to the up-cut chip removal.

Special foam router bits developed for the following materials:

• Ethafoam
• Ethylene-vinyl acetate foam (EVA)
• Expanded polypropylene (EPP)
• Expanded polystyrene (EPS)
• Extruded polystyrene foam (XPS)
• Fomex®
• High-density urethane (HUD sheet)
• Polycarbonate (Lexan™) (recommendation: use lowest recommended feed rate and shortest bits)
• Polyethylene foam
• Polylam
• Polyurethane foam
• Flexible polyurethane foam (FPF)
• Cross-linked polyethylene foam (XLPE)

These Spektra™ series foam router bits also feature the typical blue tint caused by the nACo® nanocomposite coating. This coating increases the foam router bit’s hardness and heat resistance and gives it up to 2.5 times longer tool life than cutters without this special coating.

Even if the blue tint fades after the first use, it does not detract from the effectiveness of the coating.