High Frequence Milling and Engraving Spindle motors 33mm
HF Spindles
Milling and Engraving Spindles
Milling and Engraving Spindles
Overview
Milling and Engraving Spindles 33mm
95 % of all milling and engraving applications can be carried out with our Kress Milling Spindle with 1050 Watt. However, if you are working in the area of micro-engraving or if you need a spindle that runs more than 40,000 rev./min. or even 50,000 rev./min. maintenance free per day over years, you will get best results with a HF Spindle, and if it was only for its running features in the industrial area.
 3345-0 Milling and Engraving Spindles 33mm 3345-0 |
|
|---|---|
| Shank diameter of the chuck | 2,35 mm / 3,0 mm / 3,175mm / 4,0 mm |
 3345-1 Milling and Engraving Spindles 33mm 3345-1 |
|
|---|---|
| Shank diameter of the chuck | 2,35 mm / 3,0 mm / 3,175mm / 4,0 mm |
 3345-2 Milling and Engraving Spindles 33mm 3345-2 |
|
|---|---|
| Shank diameter of the chuck | 2,35 mm / 3,0 mm / 3,175mm / 4,0 mm |
 3345-3 Milling and Engraving Spindles 33mm 3345-3 |
|
|---|---|
| Shank diameter of the chuck | 2,35 mm / 3,0 mm / 3,175mm / 4,0 mm |
 3345-4 Milling and Engraving Spindles 33mm 3345-4 |
|
|---|---|
| Shank diameter of the chuck | Type E400- 3,0 mm / 3,175mm / 4,0 mm / 6,00 mm |
 3345-5 Milling and Engraving Spindles 33mm 3345-5 |
|
|---|---|
| Shank diameter of the chuck | 2,35 mm / 3,0 mm / 3,175mm / 4,0 mm |
 3345-6 Milling and Engraving Spindles 33mm 3345-6 |
|
|---|---|
| Shank diameter of the chuck | 2,35 mm / 3,0 mm / 3,175mm / 4,0 mm |
