Used CNC router for sale – Second-hand milling machines

Approved used CNC routers for sale

We currently offer the following used CNC routers for milling wood, plastic and metal. The inventory includes second-hand machines for professional use as well as machines for the hobby sector. The CNC routers for sale are usually from a trade-in. Unless stated otherwise, we tested each machine extensively.

Three months transfer guarantee on used milling machines

Buying a used milling machine online is often a matter of luck. We, therefore, grant a transfer guarantee of 3 months to all used machines (unless otherwise stated). This includes free support and all updates of the included software.

Trade-in of second-hand CNC routers

We also accept your old CNC router for payment. This requires a working machine or a machine with little defects which we can repair.

Bargains not rare – Buying used milling machines – be quick!

Some offers are real bargains, and these used CNC milling machine were partly twice as expensive when they were brand new. So, be quick!

All offers are without warranty, especially on the availability. Prospective buyers from Germany and surrounding countries visit us every day to get a demonstration of our milling machines. The experience shows that especially our used High-Z and RaptorX machines are already sold before they arrive at our company.

Isel – Aciera – Maho – BZT – Step-Four – Haase – Datron – Optimum – cnc4all and others

Likewise, customers often move from a competitor’s machine to one of our CNC machines. It may well be that you will find milling machines of our direct competitors within our used machine offers.

Reason for trade-in: Milling machine with better performance and accuracy

The majority of the incursions of used portal milling machines are, incidentally, achieved by a wanted improvement of the CNC milling machine with regard to better accuracy and the higher performance of the CNC milling machine. Likewise, a higher stiffness is striven since metals are often to be milled, which is rarely possible with building kit machines.

Used milling machine High-Z S-1400 (old version with trapezoidal thread spindle)

The used CNC milling machine dates back to 2008. A CE declaration is included. The machine has trapezoidal thread spindles on all axes with an accuracy of approximately 0.06mm to 300mm. The positioning accuracy is 0.02mm. Sturdy components and an open frame construction from a special 4-fold pipe profile distinguish this second-hand milling machine. 1400 x 800 x 110 mm travel route. Including Kress milling motor, CNC control and undercarriage with T-slot plate are also part of the used machine.

Good condition, little used. Warranty 3 months. A demonstration is possible when picking-up the machine.

Price of the used High-Z S-1400 CNC router on request or view a new High-Z S-1400T  as a comparable alternative.

Step-Four Basic 540 CNC router used, good condition

The second-hand CNC router Basic 540 from the Austrian company Step-Four has already been on the market for several years. The company went bankrupt in 2015. A CE declaration is included. The used router machine has trapezoidal thread spindles on all axes with an accuracy of approx. 0.05mm to 300mm. Positioning accuracy is still 0.02mm.

Relatively stable components and an open frame construction characterize this used milling machine. 540 x 300 mm travel distance. Including Kress milling motor, CNC control. Well clad, it is largely protected against dirt and relatively easy to maintain. It is driven by stepping motors and trapezoidal thread spindles (D12 mm with 3mm pitch). Sliding bearing guided slides on hardened & ground steel shafts with D16 mm. Suitable for milling wood and non-ferrous metals.

Excellent condition, little used. Warranty 3 months. Demonstration arranged for the date of pick up.

Price of the used Step-Four CNC router on request or buy a new High-Z S-720 milling machines as a good alternative.

ERZ / used CNC milling machine ERZ Zöblitz in good order

The used CNC Milling Machine ERZ 500 has trapezoidal spindles on all axes with an instantaneous accuracy of about 0.25mm to 300mm. Positioning accuracy is currently 0.1 mm.

Including used Kress milling motor (of course also new) optional on request. The used milling machine is driven by stepping motors and trapezoidal thread spindles. The manufacturer states in eBay that the machine is usable for milling, plotting, drawing and engraving. Also for engraving and milling.

Attention: According to the manufacturer, the operation is only possible in full step and half step mode with its CNC controls. So either 200 steps or 400 steps per resolution, i.e. resolution at full step and slope of the spindle 3mm 0.015mm per step.

In good order, rarely used. Warranty 3 months. Demonstration arranged for date of pick-up.

Price of used ERZ CNC machine via e-mail or view High-Z CNC router machine alternatives at the best price.

ISEL second-hand CNC router with 3-axis CNC control

The second-hand ISEL CNC router is already 20 years old. This machine has ball rolling spindles on all three axes. A Kress milling motor and a spindle motor holder can be purchased as an option. 800 x 500 mm travel range. Used CNC control and undercarriage with table support are included. It also has a slot plate / T-slot table as well as a tangential knife module for cutting.

The second-hand router machine can be used to process wood, plastic and also aluminium. It can also be used for engraving. From trade-in. Good condition, little used. Without guarantee as a pure craft machine / bastide machine. Original price about 7000 DM

Price of the used ISEL CNC router via E-Mail or view High-Z router alternative at best price.

 CNC router kit from cnc4all

The used CNC router kit probably originates from the beginnings of the company CNC4all and is about 5 years old. A CE declaration is not available. The CNC control has been replaced by a CNC control of CNC-STEP. Likewise, all non-compliant and susceptible cables have been replaced with shielded cables to prevent step losses. The machine is suitable for milling in softwood. Travel distance 1000 x 600 x 100 mm. Ball screw spindles.

Good condition, hardly used.

Price of the used CNC router kit via E-Mail or view High-Z CNC router alternative at best price.

Used Haase Cut 2000 Professional CNC mill and engraving machine

The used Haase CNC mill and engraving machine of the type Cut 2000 is from 1998. The machine is suitable for light wood milling and plastic as well as aluminium with low infeed. Travel distance is 600×400 mm. Trapezoidal thread spindles. Nuts currently have about 0.4mm reverse play. Belt drive on the X-axis. Control is located in the machine table of coated plywood. The whole Haase Cut 2000 mill works perfectly together with the CNC control.

Spindle mount 43H7 and adapter for Proxxon milling motor are included. Control via Parallel port, software PCNC on diskette. The good old times :-) . Demonstration possible at pickup.

Generally, in good condition, has always been maintained. Sale without guarantee as a machine for tinkerer and hobbyists.

Price enquiry for the used CNC mill via E-Mail or view High-Z CNC machine alternative at best price.

Used STEPCRAFT-2/300 CNC router – Desktop 3D-System

For sale is a used Stepcraft CNC router 2/300. The machine should only be used to mill thin 1mm brass plates. Machine comes from trade-in of a customer who changed to a High-Z S-400. The requirement was to mill brass plates and aluminium sheets with an accuracy of 0.06mm.

The machine is completely assembled and ready for operation.

Manufacturer’s details:

Good condition. Sale without guarantee as a hobby machine.

Price of the used STEPCRAFT 2/300 CNC milling machine via E-Mail or view High-Z CNC router alternative at best price.

Used BZT CNC Portal milling machine – Desktop Milling Machine PFL 300 C / PFE

CNC used machine BZT CNC Portal milling machine PFL 300 C / PFE. Machine comes from a customer’s trade-in to obtain a larger and substantially more stable machine for milling brass and stainless steel. He switched to High-Z S-1400-T / 105.

The machine is completely assembled and ready for operation.

Details of the manufacturer BZT-CNC . Technical data:

Price of the used BZT CNC milling machine via E-Mail or view High-Z CNC milling machine alternative at best price.

Used Haase Cut 300 P-L CNC engraving machine

The used Haase CNC engraving machine Cut 300 comes from around the year 2000. This CNC machine is suitable for light work in wood and for engraving. Travel path is 1000×600 mm with trapezoidal thread spindles. Includes T-nut table. Adapter 20H7 to 43H7 inclusive (for Kress, Suhner and Proxxon milling motor).

Nuts currently have about 0.12mm-0.15 reverse play. Belt drive on the X-axis. Control is located in the machine table of coated plywood. The whole Haase Cut 300 L milling machine together with CNC control works perfectly. Control is via Parallel port, software PCNC on diskette. Demonstration possible at pickup. No instructions.

Generally, good condition, has always been maintained. Sale without guarantee.

Price of the used CNC engraving machine via E-Mail or view High-Z CNC engraving machine alternative at best price.

Aciera F5 conventional CNC machine with digital display

The used Aciera F5 milling machine is of indefinite age. A CE declaration is not available. The machine is sold as a defect since the feeds no longer work. For this used milling machine are still to get all spare parts from some suppliers since Aciera is a well-known milling machine manufacturer from Switzerland.

No function as hobbyists goods.

Price of used CNC milling machines on request by e-mail

CNC Portal milling machine Raptor-AL with aluminum frame

Used milling machine from the year 2005. A CE declaration is included. The machine is manufactured from our own production and is tested and sold with 3 months warranty. All spare parts are also available in the long term. Driving size: 1400 x 800 x 400 mm. Includes T-nut table. 4x 6,5 Amp stepper motor control, ball screw spindles 24mm.

With 3 months warranty.

Price of used CNC milling machines on request by E-Mail or High-Z T-Rex CNC milling machines – alternative at top price

Plasma cutting machine with 3000 x 2000 mm driving range including plasma torch, cold dryer and CNC control

New-quality milling machine or plasma cutting machine from the year 2010. Machine comes from trade-in for a RaptorX-SL milling machine usable for milling and plasma cutting.

A CE declaration is not included as it does not exist. The machine comes from a Far East machine dealer. No warranty or warranty claim. The machine has positioning errors on the X axis and noise from the rack and pinion gears.

Therefore, sale as defective. The 200 amp plasma burner is as new as the cold dryer. Likewise, the CNC machine is the world’s leading supplier of gas flame cutting and automatic torch height control.

Sale as defetive!

Price of used plasma cutting machine  via E-Mail or view RaptorX-SL CNC  – alternative at best price.

Used Lux Turn / LuxTurn CNC lathe with turret changer

Rarity: New Mini  CNC lathe, brand Luxtronic, type Lux Turn. Machine comes from a trade-in for a milling machine of the type High-Z suitable for milling and turning work.

No documents available, except for the operating manual, as new. G-code programming. No warranty or warranty claim. Machine bed and all other components like new except for paint defects. No scratches in the bed, etc. Revolving changer for 8 tools, 4 external lathe bars, 4 boring bars.

Despite the sale is claimed as defective, since no further documents can be delivered and we also do not know whether this manufacturer still exists. Videos are available and can be sent to you.

Sale as defective!

Price of used CNC Lathe via E-Mail

All information without guarantee and without claim of availability.