Operating Instructions

General Operating Instructions / Manual for High-Z CNC Router and Accessories – Software

Haven’t found what you were looking for? Visit our support-section.

Operating instructions for our CNC machines

High-Z Series
Quick-start guide for all High-Z routers EN
High-Z Standard operating manual EN
High-Z T-Series operating manual EN
High-Z S 1400-T operating manual EN
PlasCut S 1350-T operating manual EN
T-Rex Series
T-Rex Stepper operating manual EN
T-Rex Servo operating manual EN
RaptorX-Series
RaptorX-SL operating manual EN

Operating manuals CNC controller

Operating manual Zero-4 CNC-controller 3,5 A EN
Operating manual Zero-3 CNC-controller 2,0 A EN
Operating manual Zero-3 CNC-controller 3,5 A EN

Operating manuals CNC accessoires

CNC remote / keypad Operating Manual EN
Tangential knife TCM-3 Operating Manual EN
Tangential knife ECOCAM EOT-2 EN
Tangential knife ECOCAM EOT-3 optimizations EN
Tangential knife ECOCAM EOT-3 connector assignments EN
ECOCAM TCT-1 EN
Laser Engraver User Manual EN
Laser Engraver Operation Description EN
Tool Length Sensor – Installation and applications EN
Setup enclosure with door contact switch for High-Z – KinetiC-NC EN
Setup safety enclosure with door contact switch for High-Z – Zero4 – KinetiC-NC EN
Video: How to mount the depth regulator for engraving Video

Operating manuals CNC software

KinetiC-NC User Manual
KinetiC-NC User manual EN
KinetiC-NC Reference Manual EN
ConstruCam 3D
ConstruCam 3D installation EN
Parameter-profiles WinPC-NC Profi Zip archive
Parameter-profiled WinPC-NC USB Zip archive

Kontaktbox-Frau

  • CNC-STEP – Quick contact