With our new T-Rex version of our well-known High-Z CNC-milling machine you purchase a top technology and well-tried technic combined in one maschine.

Ball screw drives, bellow-protected HIWIN or/and THK linear carriages, solid steel frame ( type 0609 and 0712 even constructed as cast-steel frame ) in TÜV-certified CNC-STEP quality (EMV certified control) characterize this machine-series.

The High-Z/T-Rex was mainly designed for industrial panel processing, milling, cutting, engraving etc.

Solid constructed components, high precision of all mechanical components and a torsion resistant steel frame allow working with almost all materials!

By using recirculating ball screws a High-Z/T-Rex CNC-milling machine achieves fantastic precision and a almost immeasurable backlash of +/-0,01 mm.

Simultaineously, high feed rates up to 17.000 mm/minute can be achieved, due to the extremly high performance of our new ZERO3 engine control (depending on driven contour shapes).

Therewith the machine lays in the speed sector of more expensive servo-driven CNC-maschines!

Here you can view a video featuring a High-Z/T-REX. ( milling processing in hard PVC )

Thereby this new machine-series is applicable in the commercial and industrial sector for CNC-engraving, CNC-milling, CNC-drilling, CNC-measuring, CNC-cutting and even for dosing-systems to for example apply glue, dispersions etc. to 3D contours.

The CNCmilling machines are equipped with energy chains on the axes. Furthermore all CNC-units. supplied by us are equipped with an additional power socket on the Z-axis for tangential knives, HF milling spindles etc.

Additional all T-Rex CNC-machines, supplied by us are equipped with a wireless remote control / hand wheel for WIN PCNC ( Software WINPC NC USB also included ) and all other software versions, which support a hotkey allocation.

Technical data, accessory and price

Technical data High-Z / T-Rex CNC-portal
milling machine with ball screws/spindles
and bellows
T-REX 0609
Article number120010
Travel X-axis900 mm
Travel Y-axis600 mm
Travel Z-axis130 mm
Max. hight clearance Z (upper edge of t-groove
plate / lower edge bridge)
130 mm
Clamping Area X / Y on grooved panel1300 x 780 mm
Length x width x hight over all in cm154x120x142
Weight ca.300 kg
Linear guidings HIWIN / THK; width X/Y15/15 mm
Linear guidings HIWIN / THK; width Z / ØØ 16 mm
Ball screws/spindles X / Y / Z : Ø24/16/16
Frame constructionsteel/cast steel
Guidings Z Ø16 mm
Steps/revolution 1/10 micro-step2000
Slope ball screw spindle X/Y/Z10/10/5 mm
Programmable resolution minimal (Z)0,0025 mm
Backlash+/- 0,015 mm
Repeatable accuracy0,01 mm
Max. rapid speed, measured diagonal travel X
+ Y
17.000 mm/min
Operating speed max.12.000 mm/min
incl. CNC-control Zero3 / 5-channe
Supported operating systems: Windows / Linux
incl. T-slot table made of aluminium (f. short
time )
incl. milling software WIN PCNC USB
incl. shielded IGUS cabling
incl. Full version software CADCAM
ConstruCam 3D with
post-processor for Win PCNC and MACH3
Price in EUR
(incl. 19% VAT.)
Operating instructions
T-Rex quick-start guideDEEN
T-Rex operating manualDEEN

T-Rex 0609 CNC Milling Machine: 600 x 900 mm

Portal milling machine and engraving machine with ball screw, linear guiding, cast steel frame and bellows

Our new one especially for 2D and 3D panel processing

7.101,03 €

(excl. 19% German VAT)