T-Rex S-0609


T-REX 0609 CNC MILL
600x900mm


CNC mill with ball screws, bellows and steal rack.

CNC mill T-Rex 0609 with a robust steal rack and ball screw spindles. Produce your desired objects with high accuracy. The T-Rex 0609 works appropriately and quickly. Even when the machine processes hard materials within a bigger infeed depth, it stands out with high stability. The milling machine is completely assembled and fully operational on delivery.

7.101,03 €

(excl. 19% German VAT)

With our new T-Rex version of our well-known High-Z CNC-milling machine you purchase a top technology and well-tried technic combined in one maschine.

Ball screw drives, bellow-protected HIWIN or/and THK linear carriages, solid steel frame ( type 0609 and 0712 even constructed as cast-steel frame ) in TÜV-certified CNC-STEP quality (EMV certified control) characterize this machine-series.

The High-Z/T-Rex was mainly designed for industrial panel processing, milling, cutting, engraving etc.

Solid constructed components, high precision of all mechanical components and a torsion resistant steel frame allow working with almost all materials!

By using recirculating ball screws a High-Z/T-Rex CNC-milling machine achieves fantastic precision and a almost immeasurable backlash of +/-0,01 mm.

Simultaineously, high feed rates up to 17.000 mm/minute can be achieved, due to the extremly high performance of our new ZERO3 engine control (depending on driven contour shapes).

Therewith the machine lays in the speed sector of more expensive servo-driven CNC-maschines!

Here you can view a video featuring a High-Z/T-REX. ( milling processing in hard PVC )

Thereby this new machine-series is applicable in the commercial and industrial sector for CNC-engraving, CNC-milling, CNC-drilling, CNC-measuring, CNC-cutting and even for dosing-systems to for example apply glue, dispersions etc. to 3D contours.

The CNCmilling machines are equipped with energy chains on the axes. Furthermore all CNC-units. supplied by us are equipped with an additional power socket on the Z-axis for tangential knives, HF milling spindles etc.

Additional all T-Rex CNC-machines, supplied by us are equipped with a wireless remote control / hand wheel for WIN PCNC ( Software WINPC NC USB also included ) and all other software versions, which support a hotkey allocation.

Technical Data, accessory and prices


Technical data T-Rex CNC-Mill with ball screw spindles
and bellows
T-REX 0609
Article number120010
Travel X-axis900 mm
Travel Y-axis600 mm
Travel Z-axis130 mm
Max. hight clearance Z (upper edge of t-groove
plate / lower edge bridge)
130 mm
Clamping Area X / Y on grooved panel1300 x 780 mm
Length x width x hight over all in cm154x120x142
Weight ca.300 kg
Linear guidings HIWIN / THK; width X/Y15/15 mm
Linear guidings HIWIN / THK; width Z / ØØ 16 mm
Ball screws/spindles X / Y / Z : Ø24/16/16
Frame constructionsteel/cast steel
Guidings Z Ø16 mm
Steps/revolution 1/10 micro-step2000
Slope ball screw spindle X/Y/Z10/10/5 mm
Programmable resolution minimal (Z)0,0025 mm
Backlash+/- 0,015 mm
Repeatable accuracy0,01 mm
Max. rapid speed, measured diagonal travel X
+ Y
17.000 mm/min
Operating speed max.12.000 mm/min
incl. CNC-control Zero3 / 5-channe
Supported operating systems: Windows / Linux
incl. T-slot table made of aluminium (f. short
time )
incl. milling software WIN PCNC USB
incl. shielded IGUS cabling
incl. Full version software CADCAM
ConstruCam 3D with
post-processor for Win PCNC and MACH3
Price in EUR
(incl. 19% VAT.)
8.450,22
Operating instructions
T-Rex quick-start guideDEEN
T-Rex operating manualDEEN