Vacuum Table

Vacuum plate for clamping materials

---

The simple clamping technology with the power of the vacuum

For the purpose of clamping material quickly and easily we provide vacuum tables, vacuum plates and mill through mats for various flat materials. The vacuum clamping technology is a cheap way of clamping flat and flexible materials. These tables are quite useful utilities and they are optionally available for our CNC machines. Apart from this, the vacuum clamping technology is much more efficient than other clamping technologies.

---

Advantages of the vacuum clamping technology:

• Significant reduction of clamping time up to 70%
• Time-saving for thin materials up to 90%
• Vibration-free clamping of thin and flexible materials
• Compared to magnetic clamping plates the clamping of non-magnetic material is possible as well
• Clamping of different films with a special adapter plate
• Comfortable assembling and handling
• High clamping power per square centimetre through 6 mm drillings

---

Connectivity of our vacuum tables:

The vacuum tables have connections with 90° offset, which gives you the opportunity to adapt the vacuum table to your machine.

Thanks to the “all around technology” you can link the vacuum tables which each other to increase the vacuum area.

For the reason that the central vacuum plates have connection bores with 1/4 thread, you can adapt the different angle pieces and extensions.

In the standard configuration, one connection side has all necessary hose nozzles for the air connection. According to this, the other side has dummy plugs.
To generate more significant air streams, you can use both connections at the same time.

What else do you need?

You need a powerful vacuum cleaner or a side channel blower which we both provide.

A special holed rubber mat is optionally available in various sizes and provides approximately 30% more suction.

---

Included accessories:

• Mill through mat
• Adapter for vacuum cleaners
• Connection hose
• Sponge rubber plates
• Special film for the covering of the unused working area
• 4x dowel pin 6x14mm + 4x dowel pin 6x18mm

---